Aim To implement Link State Routing algorithm. S/W required NS2 Background information The Link State Routing Algorithm is an interior protocol used by every router to share information or knowledge about the rest of the routers on the network. The link state routing algorithm is distributed by which every router computes its routing […]
Aim To implement Distance Vector Routing algorithm. S/W required NS2 Background information Distant vector routing protocol also called as Bellman-Ford algorithm or Ford Fulkerson algorithm used to find the shortest route from one node to another node in the network. A distance-vector protocol calculates the distance and direction of the vector of the […]
Aim To implement flow control protocols like Sliding Window, Go Back N, and Selective Repeat protocols. S/W required NS2 Background information Sliding window protocol The working of the sliding window protocol can be divided into two steps sender steps, and the receiver steps and also some important values are needed in a network […]
Aim To implement stop-and-wait protocol. S/W required NS2 Background information Flow control Flow control is a technique that allows two stations working at different speeds to communicate with each other. It is a set of measures taken to regulate the amount of data that a sender sends so that a fast sender does […]
Aim To implement High-Level Data Link Control (HDLC) protocol. S/W required Cisco Packet Tracer Theory HDLC (High-Level Data Link Control) is a bit-oriented protocol that is used for communication over the point-to-point and multipoint links. This protocol implements the mechanism of ARQ (Automatic Repeat Request). With the help of the HDLC protocol, full-duplex […]
Aim To write a socket program for implementing ping command in Java. S/W required Java Background information Client-server communication model One of the widely used way of communication across the Internet is the client-server communication. In this communication model, there is a system called server which always listens for connections from clients. Once […]
Aim To implement client-server communication using socket programming. S/W required Java Background information Client-Server communication model One of the widely used way of communication across the Internet is the client-server communication. In this communication model, there is a system called server which always listens for connections from clients. Once a connection has been […]
Aim To implement error detection and error correction techniques. S/W required Java Background information An error occurs when the output information does not match the input information. Digital signals suffer from noise during transmission, which can create errors in binary bits travelling from one system to another. That is, a 0 bit may […]
Aim To configure a network topology using cisco packet tracer. S/W required Cisco Packet Tracer Background information Overview of a router A router is a device that connects two or more packet-switched networks or subnetworks. It serves two primary functions: managing traffic between these networks by forwarding data packets to their intended IP […]
Aim To study basic network commands and network configuration commands. S/W required Command Prompt/Terminal, Cisco Packet Tracer Background information Networking commands We can use different networking commands like ping, traceroute, nslookup, and pathping for getting information about the data sent or a server and can also be used for troubleshooting purpose. Ping Command: […]